 |
|
|
|
| Location：Home > Product > Epoxy resin Potting > Infomation |
Epoxy Casting Resin 9002GA-3/GB-3
Orgin：epoxy-cn.com |
Write：Admin |
View： |
AddDate：2010/6/18
Purchase, please contact Mr. Wang: 13771380144
Epoxy Casting Resin 9002GA-3/GB-3----suitable for Fly Back Transformer (FBT)
Ⅰ. Component A: Epoxy Resin , Filler, Additive B: Acid Anhydride, Accelerator
Ⅱ. Characteristics a) Excellent workability b) Excellent penetrating c) The exothermic peak is relatively low, high reliability of encapsulated products d) Flame resistance (UL-94, V-0) e) Excellent electronic properties f) Environmental-friendly
Ⅲ. USE Casting for Flyback Transformer and other electronic parts
Ⅳ. Packing A: 33kg B: 22kg 、220kg
Ⅴ. Transportation This product does not belong to dangerous article . It can be transported in the way as common chemical do .
Ⅵ. Storage a) Completely packed, preferably between 15℃ and 25℃ b) Free from direct sunlight c) Free from humidity d) Free from fire Ⅶ.Product property
Ⅷ. Potting Condition
Ⅸ. Cautions 1. Cautions in use a) Part A should be agitated before use to disperse sufficiently the settled filler. b) Part B may be crystallized when it is stored at low temperature, in this case, heat it to 40-50℃ until it is completely dissolved. c) Weigh both A and B respectively, into specified amounts and mix them uniformly.
2. Cautions in handling a) Work place should provide a ventilator for performing sufficient ventilation b) Protective garments, gloves, goggles are necessary to workers to avoid direct contact of the materials. c) In the event of the agent contacting the skin wash it off immediately with warm water and alkali-free soap. Medical treatment is needed if skin is seriously imitated. d) Avoid breathing vapors, which can cause respiratory damage.
3.Cautions in Storage a) Store it at the cool and dark place (preferably between 15℃ and 25℃) b) Seal the products to avoid mixing of water into the products. c) Keep to the first-in first-out d) Once the container is opened, the material should be used as fast as possible, to prevent properties from deterioration by foreign substance and moisture absorption
Viscosity Vs. Temperature of 9003GA-3 download 9002GA-3/GB-3 DOC>>
Material Safety Data
1． Identity: 9002GA-3l Material characteristics Components: BPA type epoxy resin、filler、environmental-friendly、flame retardant、additive l Physical chemical characteristics: Appearance: white liquid Odor: non Boiling point: non Specific gravity (H20-1): 1.74 Vapor pressure (mmHg and temperature): non Melting point: not available Flash point: 216℃ Solubility in water: negligible l Hazard data Health hazard : not available Fire and explosion hazard: non Stability: stable Hazardous decomposition products: carbon monoxide、carbon dioxide、hydrochloric acid l Control and protective measures Protective clothing: needed Protective gloves: needed Goggles: needed Work place: provide a ventilator for performing sufficient ventilation l Treatment of overflowing material Soak up with cotton waste or saw dust and deposit in plastic-lined bin. l Emergency treatment Skin contact : wipe the material from skin with absorbent paper , then wash with warm water and alkali-free soap. Medical treatment is needed when skin is seriously imitated. Eye contact : deal with running water for 15 minutes, then seek medical treatment. Inhalation: transfer the sick to outside and keep the air fresh. l Fire treatment: Extinguished media: carbon dioxide、foam. l Waste disposal methods Regular procedures approved by local authorities.
2． Identity: 9002GB-3l Material characteristics Components: acid anhydride, accelerator l Physical chemical characteristics: Appearance: light yellow liquid Odor: irritative Boiling point: non Specific gravity (H20-1): 1.20 Vapor pressure (mmHg and temperature): non Melting point: <-10℃ Flash point: 156℃ Solubility in water: solubility l Hazard data Health hazard : Fire and explosion hazard: non Stability : stable Hazardous decomposition products: carbon monoxide carbon dioxide hydrochloric acid l Control and protective measures Protective clothing: needed Protective gloves: needed Goggles: needed Work place : provide a ventilator l Treatment of overflowing material Soak up with cotton waste or saw dust and deposit in plastic lined bin. l Emergency treatment Skin contact : wipe the material from skin with absorbent paper , then wash with warm water and alkali-free soap. Medical treatment is needed when skin is seriously imitated Eye contact : deal with running water for 15 minutes, then seek medical treatment Inhalation: transfer the sick to outside and keep the air fresh l Fire treatment: Extinguished media: carbon dioxide、foam l Waste disposal methods Regular procedures approved by local authorities |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Copyright © www.epoxy-cn.com All Rights Reserved |
| Powered By eims_cms V 3.3 |
Category