1594固化劑 主要技術指標： 外 觀：淡黃色粘稠液體 色 號：2（加德納法） 胺 值：600-700mgKOH/g 使 用：每100g E-44型環氧樹脂配比為22-28g，可使用時間25℃為10分鐘。適用于模具澆鑄、粘膠...

4500A (P) / 4500B (P) system-component packaging materials, insulation, low stress, good resistance to thermal shock characteristics and stable electrical performance at room temperature or low temperature curing. Second, the conventional p...

Ignition coil epoxy 9001A / B For engine ignition coil potting, with excellent impregnation, electrical insulation and heat resistance. Features: (1) This series of resin with excellent mechanical, electrical performance. (2) has a good hea...

Competition (Tour) boats, surfboards, skis and sports equipment, epoxy resin airplane model 5010-5A / B I. Introduction: 5010-5A/5010-5B Department of transparent epoxy resin potting material, a mixture of low viscosity, can be used for a l...

固化劑（改性脂環胺-8221） 產品指標： 類型 ： 脂環胺加成物 粘度 (mPa.s/25℃) 70-180 胺值 (mg KOH/g) 315-345 色澤 (Gardner) 2 比重 (25℃) 1.02 固含量 (%) - 活性氫當量 89 使用量 (phr) 50 膠化時間...

Specification: Type: cycloaliphatic amine adduct Viscosity (mPa.s/25 ℃) 70-180 Amine value (mg KOH / g) 315-345 Color (Gardner) 2 Gravity (25 ℃) 1.02 Solid content (%) - Active hydrogen equivalent of 89 Usage (phr) 50 Gel time (min/150g...

Epoxy curing agent in the primer x-50(Cardanol modified） Is a unique epoxy curing agent. The curing agent can be used as the basis of filling, pouring, electronic potting, concrete floor at the end, the special anti-corrosion coating and...

The fluorocarbon resin is CTFE, vinyl compounds, quaternary enolase and acid copolymer, in the harsh temperature, chemical and strong ultraviolet radiation environment, with a fluorine polymer stability and balanced physical properties. For...

Automotive Ignition coil epoxy 9001A / B For engine ignition coil potting, with excellent impregnation, electrical insulation and heat resistance. Features: (1) This series of resin with excellent mechanical, electrical performance. (2) has...

改性酸酐固化劑（H-3177） 一、簡介： H-3177環氧樹脂硬化劑是改性 酸酐 ，粘度低，毒性小，硬化物機械性能，耐熱性能，電氣絕緣性能極性。與E-51固化耐溫可達到150度以上。 二、常規...