Die epoxy 5010A/5010-5B (room temperature hardening)
    
I. Introduction:
5010A/5010-5B Department of transparent epoxy resin potting material, a mixture of low viscosity, can be used for a long time after curing transparency and good electrical properties, can be added to a variety of colors.
Second, the conventional performance:
Testing methods or conditions of test items 5010A 5010-5B
Visual appearance of light blue transparent liquid Colorless transparent liquid
Density 25 ℃ g/cm3 1.1 ~ 1.2 0.92 ~ 0.98
Viscosity 40 ℃ mpa · s 800 ~ 1300 9 ~ 13
Ventilation from year to year shelf life at room temperature

Third, use:
Project unit or conditions 5010A/5010-5B
100:30 mix ratio by weight
Can use the time to 25 ℃, hrs 0.5
Curing conditions ℃ / hrs 25/24 or 60 / 3 or 80 / 1 ~ 1.5
 

Craft glue

No bubbles

Good transparency

Can be polished

Good toughness

High hardness
 
 
1. Tools: electronic scales, measuring cup (such as: plastic cups, paper cups), glass (or mixing gun); 5010A 70 degree cold weather warm-up needed 2 hours, so thinning viscosity, easy operation.
2. Weighing: Open electronic scale, remove the skin above the measuring cup placed on weight, add 100 grams of the 5010A glue, then add 30 grams of 5010-5B gel. (Note: 1. Must be to weight ratio, some customers do not electronic scale, the amount of his take on the use of cylinder which is not desirable, because not the same as the proportion of AB glue, it is difficult to do the right proportion of cases, so with a good cause glue does not harden. 2. Do not pay more or less by adding B to control the glue hardening glue speed, otherwise it might not harden.)
3. Mixing: AB will be weighing a good mixture of glue, use a glass rod to mix (vertical and horizontal rotation) about 3 minutes (Note: If mixing uneven and may lead to local non-hardening phenomenon.)
4. Package: one by the stirred mixture of glue into the pre-prepared products (preferably within half an hour run out to prevent the glue in chemical reactions produce large amounts of heat, leading to rapid rise in viscosity glue, short rapid hardening).
5. Curing: 25 ℃ / 24 hours or 60 ℃ / 3 hours or 80 / 1 ~ 1.5 hours
6. Cleaning: You can use acetone or anhydrous alcohol.
The product advantages: colorless, transparent, smooth surface, excellent electrical insulation properties!
This product is especially suitable for medium and large products, casting molding, casting, etc. (a single product with greater than 150 grams of plastic)
 
Fourth, use:
    For crafts, decorations and transparent, medium and large electronic components of the insulation package.
 
V, storage, transportation and precautions:
1. Such products of non-dangerous goods, as a general chemical storage and transportation, storage period, see drum.
2. Please use the sights of the product model, then the condemnation; accurate weighing, please, stir; weighing more than 200 grams, the use period will be shortened.
3. Customers can add their own color paste according to actual needs and fill.
 
VI Packing: Packing for the 5010A: 5KG ± 90g plastic bucket or 20KG / drum; 5010-5B: 5KGG ± 90g plastic bucket or 10KG / plastic bucket or other container.